&

The current position：Home page > Information dynamic > Industry News return

What is the sanding treatment of stainless steel roll

source：www.novoreg.cn | Release time：2025年04月01日

The sanding treatment of stainless steel coil is a processing technology to form uniform sanding texture on the surface of stainless steel coil by mechanical grinding or abrasive spraying. The following is a detailed introduction to the sanding treatment of stainless steel coils:
1. processing method
Manual sanding: sanding stainless steel coils with workers' hand-held grinding tools requires high technical experience of workers. The milled wires are easy to vary in thickness and efficiency, but can meet some special customization requirements.
Machine sanding: using sanding machine and other equipment for full-automatic processing, it can correctly control the depth and thickness of wire drawing, with fast processing speed, high efficiency and stable quality. It is the mainstream sanding processing method at present.
2. grinding form
Dry sanding: the stainless steel belt is directly polished with abrasive belt without any grinding fluid or lubricant. The equipment is simple and the cost is low, but more heat and dust are generated in the grinding process, which will affect the surface quality and working environment.
Wet sanding: grinding fluid needs to be sprayed during the grinding process, which is divided into water mill and oil mill. The grinding fluid of water mill is water, which has low cost, good cooling and cleaning effect, but poor rust prevention performance; The grinding fluid of oil mill is oil, and the grain is finer than that of water. It has good rust prevention performance, but the cost is high and cleaning is troublesome.
3. operation process
Uncoiling: install the stainless steel coil on the uncoiling equipment and unfold it slowly to prepare for subsequent processing.
Snow sand machine treatment: use snow sand equipment to preliminarily grind the stainless steel surface to remove the oxide scale, dirt and other impurities on the surface and make the surface more flat.
Wire drawing: select the appropriate mesh of abrasive belt according to the demand, and grind the surface of stainless steel coil through the abrasive belt rotating at high speed to form regular stripes.
Cleaning and drying machine treatment: clean the frosted stainless steel roll with clean water or special cleaning solution to remove the residual grinding debris, oil and other impurities on the surface, and then dry it through the dryer.
Winding: rewind the cleaned and dried stainless steel coil into a coil for storage and transportation.
4. process characteristics
Beautiful and durable: the surface has a fine texture, which can effectively reduce the reflection, present a matte effect, improve the decoration of the stainless steel roll, and increase the surface friction, with good anti-skid performance.
Covering defects: it can eliminate scratches, welds and other defects on the surface of raw materials of stainless steel coils, making the surface more flat and beautiful.

prev: What is the cold rolling process for stainless st… next: What is the performance of stainless steel strip …